Care and use


1. Before installation, make sure there is no block in the water pipe. Clean up the impurities, sludge, sand or others in the water pipe.

2. Used under condition of water pressure 0.3MPa, don’t advise to exceed 0.6MPa. Water temperature is 0~80℃ .

3. After installation, make sure there is no water leaking. Check the connecting parts.

4. Use taps in cold area, freeze may cause damage to make water leakage. Take necessary ways to prevent frozen, such as keep room warming, turn off the main valve.

5. The products should not be cleaned with any acidic or abrasive cleansers.

6. The products' surface should be cleaned with a soft cloth and a solution of a gentle cleanser.